User Manual

11238.07
Hawse Fairlead License Plate Holder
Page 1 of 1
Contents:
1. Hawse Fairlead License Plate Holder
w/ Snap Fittings Attached (1)
2. License Plate Mounting Bolts (4)
Attach Hawse Fairlead License Plate Holder to Hawse fairlead by aligning the 3 snap ttings with the opening in
the fairlead. Route winch line between the snap ttings and push the plate evenly until ttings engage. Use
supplied License Plate Mounting Bolts to attach license plate.
Contact Technical support if you need any assistance.
Telephone: [phone]
Fax: [phone]
[e-mail]