User manual

X10D User Manual 12
Recovering from a System Crash in WinXP Pro Embedded
In the unlikely event the system should crash, do the following to reboot your system:
1. Press the power button to turn on the X10D. During boot- up, PRESS UP KEY TO
RUN RESTORE... is displayed. Press the up arrow button.
2. The recovery software screen appears with the message ‘ Are you sure you
want to recover the partition now? ’. Press Enter to confirm. The recovery oper-
ation
starts.
Recovering from a System Crash If you are using Windows XP Embedded
If you are using the Compact Flash memory card for data storage, your X10D will fol-
low the
CF recovery procedures to re-boot your system.
Follow these steps to perform a recovery procedure using a USB flash drive should
your
system crash:
1. Download the FORMATUPD.EXE file to your local drive (C:\).
2. Connect a USB flash drive to your computer.
3. Click Start > Run and type cmd in the command box.
4. Ty p e cd\ and press Enter .
5. Ty p e FORMATUFD F: /y
6. Copy the files from the Windows XPE Recovery folder on your local drive to the
USB flash drive.
7. Connect the USB flash drive and a keyboard to your X10D and turn on the com-
puter.
8. Press the Del key repeatedly during boot up to enter the BIOS screen.
9. Highlight Advanced BIOS Features and press Enter .
10. Highlight Hard Disk Boot Priority and press Enter .
11. Highlight your USB flash drive from the list and press + to move it up until it is at
the top of the list.
12. Press F10 to exit the screen.
13. Highlight Save & Exit Setup and press Enter .