Specifications

57
testing and approvals. The engines contain a full suite of host
independent fault protection mechanisms and have been proven to
stay
Within classification during operation and single fault conditions as
required by EN/IEC 60950.* Because this testing was performed
by an independent accredited laboratory, integrators placing the
engine in most ITE (Information Technology Equipment) products
should not need to undergo the significant single-point failure
testing that would normally be required for laser safety compliance
(certain types of products aimed at medical, military, or other
specialty markets may require additional testing). Additionally, the
scan
engines do not require any beam attenuation (via scanning window
attenuation, distance-based attenuation, or other electronic
controls) to meet their laser power classification, provided that the
product’s laser classification matches the engine.
Symbol will also provide you with the documentation you need to
speed through your regulatory approvals. We will provide:
• Initial EN/IEC 60825-1 certificates showing classification and
restrictions to aid development efforts (restrictions include
labeling and other product level restrictions that are impossible to
implement on the component engine itself)*.
• FDA Accession number
• EN/IEC 60950-1 Certificates
• Proof of UL 60950-1 Recognition
• Symbol will provide copies of the EN/IEC 60825-1 laser safety test
reports to your laser/product safety test laboratory upon
receipt of a standard NDA agreement signed by both the lab and
Symbol.
• Upon request, Symbol will also provide copies of the UL
Recognition report and/or the European and CB Scheme EN/IEC