Manualshelf

User manual

ManualsBrandsRugged Computing ManualsGadgetsR11
11121314151617181920
11
Industrial PDA
(EDA)
Automotive PC
Tablet PC
IEIMobile
Introduction
High Performance and Low Power Consumption Mobile Platform
The ICEFIRE is powered by 1.8 GHz Intel® Atom™ D525 dual-core processor
(1M cache). It is a compact and highly integrated application processor with
excellent performance that allows low idle mode to improve power efciency.
Dual-Mode Input
The ICEFIRE is preinstalled with Windows® 7 Professional for Embedded
Systems. With Windows Touch, gestures, handwriting, voice recognition,
and advanced 3D display control, users' experiences are limited only by their
imagination.
The ICEFIRE is designed based on Windows and Intel® open architecture to
extend mobility for point-of-care and healthcare software applications. This
mobility allows many tasks to be performed on the run, minimizing time wasted
between the nursing station and the patient's room. The ICEFIRE enables
nurses to deliver higher quality patient care while significantly improving
productivity.
Along with Windows® 7 digitizer support and dual-mode input support, the ICEFIRE features both
WACOM digitizer and traditional resistive touch input with auto-sensing and auto-switching. When a
digitizer pen moves close to the screen of the ICEFIRE, the digitizer automatically takes effect and
switches off resistive touch input mode.
The digitizer is a more accurate and sensitive input method that can detect stylus pressure, speed, and
angle. This feature is suitable for a clinician to note patient’s vital signs. Another key benet of the digitizer
is to prevent mis-touch. A clinician can use the digitizer pen to write accurate prescriptions without the
worry of input errors. The working principles of the EMR® digitizer are as follows:
■ The tablet surface incorporates a sensor board that detects the pen's movement.
■ Weak energy is induced in the pen's resonant circuit by a magnetic eld generated by the sensor board surface.
■ The pen's resonant circuit then makes use of this energy to return a magnetic signal to the sensor board surface.
Dual input modes combined with acceleration keys make computing flexible and
convenient for healthcare staff working in many different applications.
The ICEFIRE also provides Windows® 7 featured
multi-touch, gesture, and hand-writing recognition.
Enhanced on-
screen keyboard
Hand-writing recognition
Multi-Touch SupportDigitizer Mode Resistive Touch Mode
● DDR3 support up to 4GB by UEFI BIOS
» Power saving more than 30% compared to DDR2
» Higher bandwidth performance, up to 2133 MT/s standardized
● UEFI BIOS
» Under 10 seconds boot time for fast boot
» Supports more than 2.2 TB HDD capacity
» Supports dual ranks x16 DDR3 memory up to 2 GB per DIMM, system up
to 4 GB
● New graphic performance
» The GPU contains 3rd generation graphics core GMA3150 and supports
DX9*, MPEG2 hardware acceleration
» VGA resolution up to 2046 x 1536 pixels
» Single 18-bit LVDS resolution up to 1366 x 768 pixels
Features
Windows XP
Pentium M replacement platform
D525: Intel® Atom™ dual-core CPU with DDR3
support. Its performance is 1.1x better than Intel®
D510 (Intel® Atom™ dual-core CPU with DDR2)
2048 Level
Pressure Senor
ICEFIRE-2013-V10