Operating instructions

Rugged Computing
Users Manual Rugged Table PCs 35
※ Warm-swap function operation manual
Step1. When the main battery pack status in lower than 20% you will see the warning red light blinking in
LED.(See detail at Chapter 1.3). You can hold “F3” button for 4sec to turn the Windows System
into S3 (sleep) mode.
Note: Before you start to use the “Warm-swap” function, check with your system that with a
warm-swap battery with proper model number.
Step2. Check the Battery LED status to be consistent “red” means the Operation System stay in
sleep mode. Change the battery pack with another battery. (Reference by Chapter 3.3
Replacing the Battery Pack)
Step3. Plug in another new battery and screw tight the four screws. After the Tablet PC system
detect to a new battery. The battery LED red light will turn off.
Step4. Hold “Power” Key 4 sec. to wake system up and back to the operating system.
Notice: Low Battery Warning
Hotkey Push F3 4
sec to turn into
Sleep mode
Ste
p
1.
Take off the
Main Battery by
4screws
Ste
p
2.
Ste
p
3.
Change to a
new Batter
y
PUSH Power
Button to back
to Operating
(S0) mode
Ste
p
4.