User manual

Page 19
Setup 2: Standard CMOS Features
Here you can setup the basic BIOS features such as date and time. Use the arrow
keys to move around and press enter to select the required option. You can specify
what IDE or SATA devices you have such as Hard drive, CF device etc. The easiest
way to setup the devices is by leaving it set to auto. This allows the BIOS to detect
the devices automatically so you don't have to do it manually. At the bottom, it also
displays the total memory in your system. Verify that your hard disk or CF device
have been correctly detected in the shaded fields.
Screen 2