User Manual
6
SETTING AND CHECKING HUMIDITY
The relative humidity setting regulates the entire cabinet interior. You can set the
relative humidity percentage from 60% to 25%*, and it adjusts within 1 to 3 hours. The
inside humidity can be decreased, but you cannot increase the humidity more than
the surrounding environment. Keep the door closed to ensure optimal humidity levels.
Important: Dry o any items to remove excess moisture before placing them inside
the dry cabinet.
1. Press the button until the humidity display begins to flash.
2. Use the ( ) and ( ) buttons to set the desired relative humidity value. If you set
the RH value lower than the current target, a icon will appear in the display.
3. Press the button to confirm the settings.
You can verify the target humidity value by pressing and holding the button for
approx. two seconds. The display will flash the target value and return to the actual
humidity level reading.
*Relative humidity values programmed outside the 60% to 25% range will have
no eect.
Note: Do not place the rear of the cabinet directly against a wall or other surface. This
may reduce the operational eciency. Keep the door closed to prevent the humidity
increasing inside the cabinet.
SETTING FAHRENHEIT/CELSIUS
When turning on the unit for the first time, the temperature will be displayed in
degrees Celsius.
This unit does not control temperature.
Press and hold the button for five seconds to switch between Celsius and
Fahrenheit. Press the or arrow to confirm.