User Manual
4
ATTACHING THE CABINET FEET
1. Turn the dry cabinet on its side.
2. Screw in the four cabinet feet.
3. Flip the dry cabinet right side up.
OPENING THE CABINET FOR THE FIRST TIME
You can initially access the inside of the dry cabinet by using the included keys or
supplied USB and power adapter.
Using the keys: Use the included keys to unlock and open
the door.
Using the USB Adapter:
1. Insert the USB adapter into the fingerprint lock’s USB port.
2. Connect the included power adapter to the USB adapter and a power source.
3. Place your finger on the fingerprint sensor for about one second, until the sensor
turns green, and open the door.
INSTALLING THE BATTERIES
1.
Remove the lock’s battery compartment cover and install three
AAA batteries (not included). Install the two outside batteries
first and then the middle battery. Make sure to install the
batteries with the correct orientation, following the guide on
the inside of the battery compartment.
2. Replace the compartment cover until it clicks shut.
THE FINGERPRINT LOCK
The fingerprint lock keeps your photo and video equipment safe
with the touch of a finger. You can easily store up to 20 fingerprints,
and the lock oers automatic and manual locking modes.
Adding Fingerprints
1.
Use the config. key to press and release the config. button. You’ll
hear a beep, and the fingerprint sensor will turn blue.
Locked Unlocked