Manual

1
2
3
Retighten Clamp Screw
SUGGESTED SIGHT PICTURE
FOR TRAPSHOOTING
The rear bead is aligned with the bottom of
the front bead, and the target is positioned
above the front bead.
Lead in front of the target (Not shown here)
is determined by the speed and angle of the
target, and the individual shooter’s method
of shooting..
To Move Pattern Up
Lower the Rib
(turn gear wheel counter-clockwise)
STOCK ADJUSTMENT
After the pattern location is established by adjusting the rib height, the stock can
be adjusted to suit the individual.
A. Loosen the Allen clamp screw on the right side of the stock near the buttpad.
For LENGTH OF PULL
adjustment, turn the buttpad clockwise to shorten
the length of pull, or counter-clockwise to lengthen the length of pull. The
length of pull is adjustable from 13 1/2” to 15 1/2”. After the length is
established, securely tighten the clamp screw.
1
2
3
Retighten Clamp Screw
To Lengthen
Stock,
Turn Buttpad Counterclockwise
To Shorten
Stock,
Turn Buttpad Clockwise
27