Manual

ORDERING PARTS
Please contact our Prescott, Arizona Product Service Department for parts
availability and current prices. All parts orders for RUGER
®
SR-SERIES of
pistols should be sent to: Sturm, Ruger & Company, Inc., Parts Department, 200
Ruger Road, Prescott AZ 86301-6181, [phone]. We cannot comply with
open account or C.O.D. requests. Payment in full via credit card (Visa or
MasterCard only), money order or certified bank check (no personal checks, please)
is required before any service will be performed. Please provide your credit card
number, your name as it appears on the credit card, and the expiration date. All
parts orders are subject to a minimum charge and charges for shipping and
handling. Order parts by Part Name and Part Number and include the entire serial
number of the firearm for which the parts are being ordered. There is a minimum
labor charge plus a shipping and handling charge if the parts are factory fitted. All
factory fitted parts are fit on an exchange basis only. We will not return the
replaced parts. Please contact the Product Service Department for pricing
information.
Because it is a serial numbered component, the RUGER
®
SR-SERIES frame
is defined as a “firearm” by Federal law and is not sold as a separate component.
*Parts designated by an asterisk must be factory fitted. These parts are fitted on an
exchange basis only. We will not return the replaced parts. We will not return any
part that is broken, malfunctioning, badly worn or has been modified. See
“Warning - Parts Purchasers,” above.
CAUTION: A gun containing modified, broken, malfunctioning,
or badly worn parts should not be fired!
!
35
RUGER
®
SR9
®
PRODUCT SAFETY WARNING
AND RECALL NOTICE
We have determined that some Ruger SR9 pistols manufactured between October
2007 and April 2008 can, under certain conditions, fire if dropped with their
manual safeties in the "off" or "fire" position. The pistols will not fire if the
manual safety is in the "on" or "safe" position.
We will retrofit all Ruger SR9 pistols starting with serial number prefix “330”
(330-xxxxx) with the new trigger group at no charge
to our customers.
In order to ensure correct fitting, the new parts must be installed at our Ruger
factory in Prescott, Arizona. We will remove the old parts and install the new
trigger group promptly, at no charge, and will return the pistol to you. The old
parts will not be returned.
Please contact us by going online at www.ruger.com/SR9Recall/; e-mail at
[e-mail]; fax [phone]; or by calling our Prescott Product
Service Department at [phone].