Manual

6. Now push the takedown pin all the
way through the frame to the
right. (See Figure 21.)
7. Allow the slide to move fully
forward by retracting the slide and
allowing it to move forward. (See
Figure 22.)
8. Replace the empty magazine in
frame through butt of pistol. (See
Figure 23.) This action returns the
ejector to its working position.
This pistol will not function
normally unless the ejector is in its
Upward (rearward) position.
FIGURE 20
5. Replace the slide
onto frame. Pull
the slide fully back
and lock it into
position by
pushing upward
on the slide stop.
(See Figure 20.)
1
2
FIGURE 21
FIGURE 23
Insert
Magazine
FIGURE 22
Retract Slide and
Allow Slide to Move Forward
27