Manual

TO REASSEMBLE

1. Be certain the chamber and magazine are empty. Always keep the pistol

pointed in a safe direction.

2. With the slide held

upside down,

replace the barrel

and push it

rearward into its

locked position.

(See Figure 17.)

3. Place the recoil

spring assembly

into position.

Make sure that the

plastic end of the

recoil spring goes

into the slide. (See

Figure 18.)

4. Be certain that ejector is

pulled down and locked in

its lower (forward)

position. Push the trigger

into its fully forward

position. (See Figure 19.)

FIGURE 17

FIGURE 18

FIGURE 19

Ejector Down