Manual

ORDERING PARTS
Please contact our Prescott, Arizona Product Service Department for parts
availability and current prices. All parts orders for the RUGER
®
SR9
TM
pistols should be sent to: Sturm, Ruger & Company, Inc., Parts Department, 200
Ruger Road, Prescott AZ 86301-6181, [phone]. We cannot comply with
open account or C.O.D. requests. Payment in full via credit card (Visa or
MasterCard only), money order or certified bank check (no personal checks,
please) is required before any service will be performed. Please provide your
name as it appears on the credit card along with the expiration date of the card.
All parts orders are subject to a minimum charge and charges for shipping and
handling. Order parts by Part Name and Part Number and include the entire
serial number of the firearm for which the parts are being ordered. There is a
minimum labor charge plus a shipping and handling charge if the parts are
factory fitted. All factory fitted parts are fit on an exchange basis only. We will
not return the replaced parts. Please contact the Product Service Department for
pricing information.
Because it is a serial numbered component, the RUGER
®
SR9
TM
frame is
defined as a “firearm” by Federal law and is not sold as a separate component.
*Parts designated by an asterisk must be factory fitted. These parts are fitted on
an exchange basis only. We will not return the replaced parts. We will not return
any part that is broken, malfunctioning, badly worn or has been modified. See
“Warning - Parts Purchasers,” above.
CAUTION: A gun containing modified, broken, malfunctioning,
or badly worn parts should not be fired!
!
33
PARTS MUST FIT CORRECTLY
WARNING - PARTS PURCHASERS
!
All work performed is subject to a minimum labor charge and charges for
shipping and handling. Most models can be reblued, but custom gunsmithing
service or nonstandard alterations are NOT AVAILABLE from Ruger Product
Service Departments. Please contact the Product Service Department for pricing
information.
It is the purchaser’s responsibility to be absolutely
certain that any parts ordered from the factory are
correctly fitted and installed. Firearms are
complicated mechanisms and IMPROPER FITTING
OF PARTS MAY RESULT IN A DANGEROUS
MALFUNCTION, DAMAGE TO THE FIREARM, AND
SERIOUS INJURY TO THE SHOOTER AND OTHER
PERSONS. The purchaser and installer of parts must
accept full responsibility for the correct adjustment
and functioning of the pistol after such installation.