Manual

4. Remove fingers (or whatever you used to push the ejector forward) from

ejection port. From the right side of the pistol, press inward on the takedown

pin (see Figure 12a) and remove it from the pistol (see Figure 12b).

6. With the slide held

upside down, slightly

depress the recoil

spring to disengage

it from its seat

against the barrel

lug. (See Figure 14.)

Lift the recoil spring

forward and upward

to remove it from

the slide.

FIGURE 12a

FIGURE 12b

FIGURE 14

5. Carefully allow the slide to move

forward until it is no longer

under spring tension. Now push

the slide forward and remove the entire slide

assembly from the frame. (See Figure 13.)

Press Takedown Pin

Pull

Out

Remove Slide Assembly

Remove Recoil

Spring

FIGURE 13