Manual
Any autoloading pistol may occasionally
malfunction. If a cartridge hangs up, jams, or
binds when being chambered, do not attempt to
force it into the chamber by pushing or striking
the slide. Carefully remove it.
Most failures of a cartridge to feed or to chamber
properly are caused by a damaged magazine,
incorrect gun handling, insufficient lubrication,
or improper ammunition.
Whatever the cause, the user of the pistol must,
above all, recognize that any cartridge jam can
result in the very potentially dangerous situation
of a cartridge discharging before it is properly
chambered. If this happens, the cartridge case
may rupture and its fragments fly out of the
ejection port of the pistol with sufficient force to
cause serious injury. Always wear shooting
glasses!
WARNING - MALFUNCTIONS
the cartridge clear of the pistol. These failures usually are the result of the slide
not being pulled rearward vigorously. From the foregoing, it is clear that the gun
user must:
1. Always visually check the chamber and the br
eech-face after opening the slide
to eject a chambered cartridge. If the slide is not vigorously retracted when
being operated by hand, the extracted cartridge can be “ejected” into the
magazine-well of the grip frame or remain held to the breech-face by the
extractor.
2. Thor
oughly clean the chamber and the extractor as often as necessary.
If an empty magazine is in the pistol when the slide is being hand retracted to
extract a cartridge, the cartridge may drop on top of the magazine or remain
held to the breech-face by the extractor. Then when the slide goes forward, the
cartridge will be chambered again! Remember — always remove the magazine
befor
e clearing the chamber, and visually ensure that no cartridges remain
anywhere in the gun.
HITTING PRIMER
CAN BURST CARTRIDGE
21
!
TO CLEAR A MALFUNCTION (“JAM”)
1. Be certain the muzzle is continually pointed in a safe direction.
2. If possible, remove the magazine. It may be necessary to manually remove a
jammed cartridge that has only been partially stripped from the magazine. If
so, use extreme care. Lock the slide open with the slide stop before attempting










