Manual

ManualsBrandsRuger ManualsFirearmsSR556

WARNING –PARTS PURCHASERS

It is the purchaser’s responsibility to be

absolutely certain that any parts ordered from

the factory are correctly fitted and installed.

Firearms are complicated mechanisms and

IMPROPER FITTING OF PARTS MAY RESULT

IN A DANGEROUS MALFUNCTION, DAMAGE

TO THE FIREARM, AND SERIOUS INJURY TO

THE SHOOTER AND OTHER PERSONS. The

purchaser and installer of parts must accept full

responsibility for the correct adjustment and

functioning of the rifle after such installation.

PARTS MUST FIT CORRECTLY

ORDERING PARTS

Please contact the New Hampshire Product Service Department for parts

availability and current prices. All parts orders for the

RUGER

SR-556

rifle should be sent to: Sturm, Ruger & Co., Inc., Product Service Department, 411

Sunapee Street, Newport, New Hampshire 03773, 603-865-2442. We cannot

comply with open account or C.O.D. requests. Payment in full via credit card (Visa

or MasterCard only), money order or certified bank check (no personal checks,

please) is required before any service will be performed. Please provide your name

as it appears on the credit card along with the expiration date of the card. All parts

orders are subject to a minimum charge and charges for shipping and handling.

Order parts by Part Name and Part Number and include the entire serial number

of the firearm for which the parts are being ordered. There is a minimum labor

charge plus a shipping and handling charge if the parts are factory fitted. All

factory fitted parts are fit on an exchange basis only. We will not return the

replaced parts. Please contact the Product Service Department for pricing

information.

Barrels, and a number of other component parts must be fitted at the factory.

Company policy is to proof-test and/or function fire all barrels after fitting to the

receivers in which they are to be used. This procedure ensures maximum

protection to our customers. The special proof-test ammunition used in this

testing is sold only to bonafide firearms manufacturers and is not available to gun

shops, gunsmiths, or individuals.

Because the receiver of the

RUGER

SR-556

is a serial numbered

component, it is defined as a “firearm” by Federal law and is not sold as a separate

component.

*Parts designated by an asterisk must be factory fitted. These parts are fitted on an

exchange basis only. We will not return the replaced parts. We will not return any

part that is broken, malfunctioning, badly worn or has been modified. See

“Warning – Parts Purchasers,” above.

CAUTION: A gun containing modified, broken, malfunctioning,

or badly worn parts should not be fired.