Manual

23
WARNING –DISASSEMBLY
1
2
3
4
5
Safety “ON”
DISASSEMBLY
Be Sure Rifle Is Unloaded!
Although the SR-556
TM
Rifle can be disassembled, reassembled, and cleaned
in almost any surrounding, it is preferrable to carry out these procedures on a
workbench or table which has a covered top. A piece of shallow nap rug or an
old blanket is an ideal covering. Such a covering keeps the rifle from slipping
and being scratched.
Figure 7
1. With the rifle pointing in a safe
direction, safety in the “SAFE”
position, remove the magazine
by
pushing the magazine catch button
inward to release magazine, while
drawing magazine down (see Fig. 7).
Figure 8
2. Pull the charging handle all the way
to the rear and push and hold the
bottom tab of the bolt catch and
release the charging handle. Make
sure safety is in the “SAFE” position
(see Fig. 8). NOTE: Hammer must
be cocked to place the selector in
the “SAFE” position. Again, be sure
chamber is empty!
Always unload a firearm
before cleaning, lubrication,
disassembly or assembly.
UNLOAD BEFORE
CLEANING
1
1
2
2