Manual

5
LOCKING DEVICE
INSTALLATION INSTRUCTIONS
WARNING – USE OF LOCKING DEVICES
• Always keep your firearm pointed in a safe direction,
including when you are installing or removing your
locking device.
• Always verify that your firearm is completely unloaded
before installing your locking device.
• Do not
install locking devices in the trigger guard;
always keep your fingers and locking device outside the
trigger guard during device installation and removal.
• Store firearms, ammunition and keys separately and
securely, away from children and careless adults; do not
store your firearm with the keys in the locking device.
• Do not attempt to work the action of your firearm with
the locking device in place; this may damage your
firearm.
• While locking devices are an important aid to security
measures, they are not a substitute for safe firearm
handling and proper storage. Remember that any
mechanical device can be bypassed with enough time,
knowledge, determination and equipment.
LOCKING DEVICES MUST BE USED
SAFELY AND RESPONSIBLY
Use the Correct Lock: While the basic locking device is substantially
similar for all Ruger firearms, due to the different shapes of the many Ruger
firearms, some firearms utilize different locking devices. The 3 1/2” lock and
clamp are for use with the RUGER
®
SR-22
TM
RIFLE. It is very
important to use the correct locking device!
To Install the Factory-S uppl i ed Locki ng Device:
1. Keep the muzzle pointed in a safe direction and your fingers outside the
trigger guard at all times!
2. Be sure the firearm and its magazine are completely unloaded and contain
no cartridges or cartridge cases! Remove the magazine from your firearm.
3. Open the action completely. Use the bolt lock to keep the action open
during installation of the locking device.
Do not s tore
keys i n l ock.