Manual

It is the purchaser’s responsibility to be

absolutely certain that any parts ordered from

the factory are correctly fitted and installed.

Firearms are complicated mechanisms and

IMPROPER FITTING OF PARTS MAY RESULT

IN A DANGEROUS MALFUNCTION, DAMAGE

TO THE FIREARM, AND SERIOUS INJURY TO

THE SHOOTER AND OTHER PERSONS. The

purchaser and installer of parts must accept full

responsibility for the correct adjustment and

functioning of the firearm after such

installation.

PARTS MUST FIT CORRECTLY

WARNING–PARTS PURCHASERS



All work performed is subject to a minimum labor charge and charges for

shipping and handling. Most models can be reblued, but custom gunsmithing

service or nonstandard alterations are NOT AVAILABLE from Ruger Product

Service Departments. Please contact the Product Service Department for pricing

information.

ORDERING PARTS

Please contact the New Hampshire Product Service Department for parts

availability and current prices. All parts ordered for the RUGER

SR-22

RIFLE should be sent to: Sturm, Ruger & Co., Inc., Product Service

Department, 411 Sunapee Street, Newport, New Hampshire 03773, 603-865-

2442. We cannot comply with open account or C.O.D. orders. Payment in full via

credit card (Visa or MasterCard only), money order or certified bank check (no

personal checks, please) is required before any service will be performed. Please

provide your name as it appears on the credit card along with the expiration date

of the card. All parts orders are subject to a minimum charge and charges for

shipping and handling. Order parts by Part Name and Part Number and include

the entire serial number of the firearm for which the parts are being ordered.

There is a minimum labor charge plus a shipping and handling charge if the

parts are factory fitted. All factory fitted parts are fit on an exchange basis only.

We will not return the replaced parts. Please contact the Product Service

Department for pricing information.

Because the receiver is a serial numbered component, it is defined as a “firearm”

by Federal law and is not sold as a separate component.

*Parts designated by an asterisk must be factory fitted. These parts are fitted on

an exchange basis only. We will not return the replaced parts. We will not return

any part that is broken, malfunctioning, badly worn or has been modified. See

“Warning – Parts Purchasers” above.

CAUTION: A gun containing modified, broken, malfunctioning,

or badly worn parts should not be fired.