Manual

Firing a rifle with oil, grease, or any other material
even partially obstructing the bore may result in
damage to the rifle and serious injury to the
shooter and those nearby. Do not spray or apply
lubricants directly on ammunition. If the powder
of a cartridge is affected by the lubricant, it may
not be ignited, but the primer firing may push the
bullet into the bore where it may be lodged. Firing
a subsequent bullet into the obstructed bore may
damage the rifle and cause serious injury or death
to the shooter and those nearby. Use lubricants
properly. You are responsible for the proper care
and maintenance of your firearms.
IMPROPER LUBRICATION
DESTROYS GUNS
23
examine. Bore fouling can contribute to reduced accuracy, and grease
accumulation in the chamber can interfere with proper feeding of cartridges
from the magazine.
3. Using powder solvent on a clean patch or bristle brush, remove powder residue
from all components of the mechanism. After cleaning, run a dry patch
through the bore, then follow with a patch that is very lightly oiled. Wipe all
surfaces clean with cloth, then wipe all surfaces with a patch or cloth that has
been very lightly oiled.
4. NOTE: Only a light application of oil is needed to provide adequate lubrication
of moving parts and to prevent rust. Excess accumulations of oil tend to
attract particles of dust and dirt and may congeal in cold weather which can
interfere with the safe and reliable functioning of the rifle.
WARNING–LUBRICATION
OIL