Manual

ORDERING PARTS
Please contact our Prescott, Arizona Product Service Department for parts
availability and current prices. All parts orders for the RUGER
®
SR1911
TM
of
pistols should be sent to: Sturm, Ruger & Company, Inc., Parts Department, 200
Ruger Road, Prescott AZ 86301-6181, [phone]. We cannot comply with
open account or C.O.D. requests. Payment in full via credit card (Visa or
MasterCard only), money order or certified bank check (no personal checks,
please) is required before any service will be performed. Please provide your
credit card number, your name as it appears on the credit card, and the
expiration date. All parts orders are subject to a minimum charge and charges
for shipping and handling. Order parts by Part Name and Part Number and
include the entire serial number of the firearm for which the parts are being
ordered. There is a minimum labor charge plus a shipping and handling charge
if the parts are factory fitted. All factory fitted parts are fit on an exchange basis
only. We will not return the replaced parts. Please contact the Product Service
Department for pricing information.
Because it is a serial numbered component, the RUGER
®
SR1911
TM
frame is
defined as a “firearm” by Federal law and is not sold as a separate component.
*Parts designated by an asterisk must be factory fitted. These parts are fitted on
an exchange basis only. We will not return the replaced parts. We will not return
any part that is broken, malfunctioning, badly worn or has been modified. See
“Warning - Parts Purchasers,” above.
CAUTION: A gun containing modified, broken, malfunctioning,
or badly worn parts should not be fired!
!
35
PARTS MUST FIT CORRECTLY
WARNING - PARTS PURCHASERS
!
It is the purchaser’s responsibility to be absolutely
certain that any parts ordered from the factory are
correctly fitted and installed. Firearms are
complicated mechanisms and IMPROPER FITTING
OF PARTS MAY RESULT IN A DANGEROUS
MALFUNCTION, DAMAGE TO THE FIREARM, AND
SERIOUS INJURY TO THE SHOOTER AND OTHER
PERSONS. The purchaser and installer of parts must
accept full responsibility for the correct adjustment
and functioning of the pistol after such installation.