Manual

REAR SIGHT ADJUSTMENT
WARNING: ALWAYS ENSURE YOUR FIREARM IS UNLOADED BEFORE
ADJUSTING YOUR SIGHTS. AT ALL TIMES YOU SHOULD FOLLOW THE BASIC
RULES OF SAFE GUN HANDLING.
The RUGER
®
SR1911
TM
Pistols are equipped with a rear sight which is
adjustable for windage only.
To adjust where the group prints, loosen the setscrew in the rear sight using a
properly sized Allen Wrench. Move the rear sight in the direction you wish the
group to move on the target. For example, if the group should move to the right,
move the rear sight to the right. Once the sight is moved to the desired position,
tighten the setscrew.
33
WARNING—BEFORE SHIPPING ANY FIREARM,
BE ABSOLUTELY CERTAIN THAT IT AND ITS
MAGAZINE ARE UNLOADED. DO NOT SHIP
CARTRIDGES WITH A FIREARM.
!
SERVICE AND PARTS POLICY
If you have any questions with regard to the performance of your RUGER
®
SR1911
TM
pistol, please write or call (928-778-6555) our Product Service
Department in Prescott, Arizona, fully describing all circumstances and
conditions involved. If you should return your pistol to the factory for repair, or
order parts for it, please comply with the following suggestions for prompt
service: