Manual

NEVER DISASSEMBLE YOUR HANDGUN BEYOND THE FIELD

STRIPPING PROCESS OUTLINED IN THIS MANUAL. NEVER

MANIPULATE ANY INTERNAL COMPONENTS BEYOND WHAT

YOU ARE SPECIFICALLY INSTRUCTED TO DO IN THIS MANUAL SINCE

THIS MAY AFFECT THE RELIABILITY, FUNCTIONING AND SAFETY OF

YOUR HANDGUN.

OTHER BRAND PARTS MUST NEVER BE USED IN YOUR RUGER

SR1911

EVEN THOUGH THE PARTS MAY APPER TO BE SIMILAR.

USE OF ANY PARTS OTHER THAN GENUINE RUGER

SR1911

PARTS MAY CAUSE A SERIOUS MALFUNCTION RESULTING IN INURY

OR DEATH TO YOU OR OTHERS.

TO REASSEMBLE

WARNING: ALWAYS FOLLOW THE DISASSEMBLY AND REASSEMBLY

INSTRUCTIONS EXACTLY. NEVER DO ANYTHING BEYOND WHAT YOU ARE

SPECIFICALLY INSTRUCTED TO DO IN THIS MANUAL. NEVER ALTER OR

MODIFY THE PARTS IN YOUR FIREARM.

WARNING: WEAR SAFETY GLASSES EVERY TIME YOU ASSEMBLE OR

DISASSEMBLE YOUR FIREARM.

1. Verify that the hammer is in the fully cocked position. Ensure that the barrel

chamber is unloaded and nothing is in the bore of the barrel.

2. Turn the slide bottom up, turn

the barrel link forward and place

the barrel into the slide from the

front. See Figure 21.

3. Insert the barrel bushing into the

slide and rotate it clockwise to

lock it into place. See Figure 22.

Figure 21

Figure 22