Manual

Barrels, cylinders, cylinder/crane assemblies and a number of other component

parts must be fitted at the factory. Company policy is to proof-test and/or

function fire all barrels after fitting to the frames in which they are to be used.

This procedure ensures maximum protection to our customers. The special

proof-test ammunition used in this testing is sold only to bonafide firearms

manufacturers and is not available to gun shops, gunsmiths, or individuals.

Because the frame of the RUGER

SP101 revolver is a serial numbered

component, it is defined as a “firearm” by Federal law and is not sold as a

separate component.

*Parts designated by an asterisk must be factory fitted. These parts are fitted on

an exchange basis only. We will not return the replaced parts. We will not return

any part that is broken, malfunctioning, badly worn or has been modified. See

“Warning – Parts Purchasers”, p. 26.

CAUTION: A gun containing modified, broken,

malfunctioning, or badly worn parts should not be fired.