Manual

Never place or store any firearm in
such a manner that it may be
dislodged. Firearms should always be
stored securely and unloaded, away
from children and careless adults. Use
the locking device originally supplied
with this firearm for storage.
The use of a locking device or safety
lock is only one aspect of responsible
firearms storage. For increased safety,
firearms should be stored unloaded and
locked in a location that is both
separate from their ammunition and
inaccessible to children and any other
unauthorized person.
STORE SECURELY & UNLOADED
23
WARNING –STORAGE
To reassemble the revolver for firing, carefully reinsert the trigger housing into
the frame. Place the hammer into the top of the frame, and reinsert the hammer
pivot pin. Cock the hammer, reinstall the mainspring strut, and remove the
disassembly pin from the mainspring strut. Lower the hammer and replace the
grips on the revolver. The revolver is now reassembled and can be loaded and
fired normally.
While the revolver is less likely to be used by unauthorized persons when
disassembled in the above manner, it is always safest to store a firearm with
the supplied locking device correctly installed, or to store the firearm in a gun
safe or other secure location, away from children and unauthorized adults.
Guns should always be stored securely, unloaded and separate from their
ammunition.
CARE OF STAINLESS STEEL REVOLVERS
Revolvers made of stainless steel are more resistant to corrosion than blued steel
revolvers. However, in the interest of proper operation and long life of your
revolver, inspect it frequently and clean, lubricate and apply an appropriate rust
preventative.
Sometimes surface discoloration may be noted, particularly in the grip area of
stainless steel revolvers, resulting from perspiration. Contact with some types of
holsters can also cause stains or rusting. Rusting may also occur as a result of
the revolver being exposed to moisture, humidity, salt air or chemicals.