Manual

readily removable without tools and dismantles, along with the

cylinder/crane group, into a small number of subassemblies for inspection

and cleaning (See Figure 1 and Figure 2, below).

The internal parts are installed either through the top or bottom of the grip-

frame; therefore, no side plate is needed. The resulting double solid frame

contributes greatly to the extraordinary strength and reliability of these

revolvers.

The

RUGER

REDHAWK

revolver has a transfer bar which is connected

directly to the trigger. The transfer bar - which is raised into firing position

as the trigger is pulled to the rear - transmits the energy of the hammer

blow to the firing pin. The transfer-bar safety system provides that the

hammer blow can be transmitted to the firing pin only when the trigger is

pulled all the way to the rear. This is a positive internal safety feature.

NOMENCLATURE

Figure 1.

DISASSEMBLED

VIEW

Figure 2.

Despite their many highly desirable features, Ruger revolvers–as with all

firearms–must at all times be handled with strict attention to correct safety

practices, and be inspected frequently to assure the gun is working properly.