Manual

26
State precisely what is wrong. Please enclose copies of any previous
correspondence.
Work performed will bear a net minimum labor charge of $20.00 plus a
$20.00 shipping and handling charge. The charge for rebluing the
RUGER
®
REDHAWK revolver is $50.00 plus a $20.00 shipping and
handling charge. Custom gunsmithing service or nonstandard alterations are
NOT AVAILABLE from Ruger Product Service Departments.
WARNING –PARTS PURCHASERS

It is the purchaser’s responsibility to be
absolutely certain that any parts ordered from
the factory are correctly fitted and installed.
Firearms are complicated mechanisms and
IMPROPER FITTING OF PARTS MAY RESULT
IN A DANGEROUS MALFUNCTION, DAMAGE
TO THE FIREARM, AND SERIOUS INJURY TO
THE SHOOTER AND OTHER PERSONS. The
purchaser and installer of parts must accept full
responsibility for the correct adjustment and
functioning of the revolver after such
installation.
PARTS MUST FIT CORRECTLY
ORDERING PARTS
Please contact the New Hampshire Product Service Department for parts
availability and current prices. All parts orders for the RUGER
®
REDHAWK revolvers should be sent to: Sturm, Ruger & Co., Inc.,
Product Service Department, 411 Sunapee Street, Newport, New Hampshire
03773, 603-865-2442. We cannot comply with open account or C.O.D.
orders. Payment in the form of a check, money order, Visa or Mastercard
must accompany your order. Credit Card orders must include the account
number, expiration date and whether it is a Visa or Mastercard account.
Minimum parts order is $1.00 plus $3.50 shipping and handling charge.
Order parts by Part Name and Part Number and include the entire serial
number of the firearm for which the parts are being ordered.
There is a minimum net labor charge of $20.00 plus $20.00 shipping and
handling charge if the parts are factory fitted. All factory fitted parts are fit
on an exchange basis only. We will not return the replaced parts.
Barrels, cylinders, cylinder/crane assemblies and a number of other
component parts must be fitted at the factory. Company policy is to proof-
test and/or function fire all barrels after fitting to the receivers in which they
are to be used. This procedure ensures maximum protection to our
customers. The special proof-test ammunition used in this testing is sold
only to bonafide firearms manufacturers and is not available to gun shops,
gunsmiths, or individuals.