Manual

22
STORAGE
GUNS SHOULD NOT BE STORED LOADED!
Do not keep your revolver in a leather, fabric or canvas holster when it is stored.
These materials attract moisture, even though the holster may appear to be
perfectly dry.
TO RENDER THE REVOLVER INOPERATIVE FOR SAFE STORAGE
With the muzzle pointed in a safe direction, press the cylinder latch and swing the
cylinder outward. Check to be sure that each chamber is completely unloaded!
With a coin or screwdriver, unscrew the grip panels and remove the grips. Cock the
hammer and then insert the disassembly pin into the hole at the bottom of the
mainspring strut. Uncock the hammer, remove the hammer strut from the frame,
remove the hammer pivot from the frame, and lift the hammer out of the top of
the frame. Use a screwdriver to depress the trigger housing latch and remove the
trigger assembly from the bottom of the frame.
Store the hammer and the trigger assembly in different locations from the frame.
When disassembled in this manner, the revolver is inoperable. It is impossible to
fire the revolver until the trigger assembly and the hammer have been correctly
reassembled into the frame.
Never place or store any firearm in
such a manner that it may be
dislodged. Firearms should always be
stored securely and unloaded, away
from children and careless adults. Use
the locking device originally supplied
with this firearm for storage.
The use of a locking device or safety
lock is only one aspect of responsible
firearms storage. For increased safety,
firearms should be stored unloaded and
locked in a location that is both
separate from their ammunition and
inaccessible to children and any other
unauthorized person.
STORE SECURELY & UNLOADED
WARNING –STORAGE
LOADED
To reassemble the revolver for firing, carefully reinsert the trigger housing into
the frame. Place the hammer into the top of the frame, and reinsert the hammer
pivot pin. Cock the hammer, reinstall the mainspring strut, and remove the
USE THE LOCKING DEVICE SUPPLIED WITH THE REVOLVER FOR STORAGE.
(SEE PAGE 6)