Manual

5. Before firing, remove all oil and grease from the bore. Do not keep the

pistol stored in a leather holster or case. Leather attracts moisture, even

though the holster or case may appear to be perfectly dry.

Never place or store any firearm in such a

manner that it may be dislodged.

Firearms should always be stored securely

and unloaded, away from children and

careless adults. Use the lockable storage

box, which was originally sold with this

firearm, for storage.

STORE SECURELY & UNLOADED

WARNING - STORAGE

SIGHT ADJUSTMENT

The RUGER

P95DC pistols are equipped with a rear sight which is

adjustable for windage only. After the rear-sight lock screw has been loosened

(for those pistols equipped with a rear sight lock screw), the rear sight can be

drifted laterally in its dovetail on the top of the slide by tapping it with a wooden-

or plastic-headed hammer or similar implement. Move the rear sight in the

direction you want the shot to move on the target. After the rear sight is adjust-

ed, tighten the rear-sight lock screw. The front sight is fixed. Both front and rear

sights are provided with white-dot inserts for rapid target acquisition and easy

alignment of the sights to obtain a correct sight picture.

WARNING - LUBRICATION

IMPROPER LUBRICATION

DESTROYS GUNS

Firing a pistol with oil, grease, or any other material

even partially obstructing the bore may result in damage

to the pistol and serious injury to the shooter and those

nearby. Do not spray or apply lubricants directly on

ammunition. If the powder of a cartridge is affected by

the lubricant, it may not be ignited, but the primer fir-

ing may push the bullet into the bore where it may be

lodged. Firing a subsequent bullet into the obstructed

bore may damage the pistol and cause serious injury or

death to the shooter and those nearby. Use lubricants

properly. You are responsible for the proper care and

maintenance of your firearms.