Manual

ORDERING PARTS
Please contact the Arizona Product Service Department for parts availability and
current prices. All parts orders for the RUGER
®
P345
TM
pistols should be
sent to: Sturm, Ruger & Company, Inc., Parts Department, 200 Ruger Road,
Prescott AZ 86301-6181, [phone]. We cannot comply with open account
or C.O.D. requests. Payment in the form of a check, money order, Visa or
Mastercard must accompany your order. Credit Card orders must include the
account number, expiration date and whether it is a Visa or Mastercard account.
Minimum parts order is $1.00 plus a $3.50 shipping and handling charge. Order
parts by Part Number and Part Name, include the entire serial number of the
firearm for which the parts are being ordered. There is a minimum net labor
charge of $20.00 plus $20.00 shipping and handling charge if the parts are
factory fitted. All factory-fitted parts are fitted on an exchange basis only. We will
not return the replaced parts.
Because it is a serial numbered component, the RUGER
®
P345
TM
frame is
defined as a “firearm” by Federal law and is not sold as a separate component.
*Parts designated by an asterisk must be factory fitted. These parts are fitted on
an exchange basis only. We will not return the replaced parts. We will not return
any part that is broken, malfunctioning, badly worn or has been modified. See
“Warning - Parts Purchasers,” above.
CAUTION: A gun containing modified, broken, malfunctioning,
or badly worn parts should not be fired!
!
30
PARTS MUST FIT CORRECTLY
WARNING - PARTS PURCHASERS
!
Enclose a letter which includes your name, address, telephone number, and
serial number and model of the firearm. Describe in detail the trouble you have
experienced with your firearm, or the work you wish to have done. Merely stating
that the firearm “needs repair” is inadequate information. Please enclose copies
of any previous correspondence.
Work performed will bear a net minimum labor charge of $20.00 plus a $20.00
shipping and handling charge. The charge for metal refinishing the RUGER
®
P345
TM
pistol is $50.00, plus a $20.00 shipping and handling charge. Custom
gunsmithing service or nonstandard alterations are NOT AVAILABLE from Ruger
Product Service Departments.
It is the purchaser’s responsibility to be absolutely
certain that any parts ordered from the factory are
correctly fitted and installed. Firearms are
complicated mechanisms and IMPROPER FITTING
OF PARTS MAY RESULT IN A DANGEROUS
MALFUNCTION, DAMAGE TO THE FIREARM, AND
SERIOUS INJURY TO THE SHOOTER AND OTHER
PERSONS. The purchaser and installer of parts must
accept full responsibility for the correct adjustment
and functioning of the pistol after such installation.