Manual

3. Using powder solvent on a clean patch or bristle brush, remove powder
residue from all components of the mechanism. After cleaning, run a dry
patch through the bore, then follow with a patch that is very lightly oiled.
Wipe all surfaces clean with cloth, then wipe all surfaces with a patch or cloth
that has been very lightly oiled.
4. NOTE: Only a light application of oil is needed to provide adequate
lubrication of moving parts and to prevent rust. Excess accumulations of oil
tend to attract particles of dust and dirt and may congeal in cold weather,
which can interfere with the safe and reliable function of the pistol.
5. Before firing, remove all oil and grease from the bore.
26
WARNING - LUBRICATION
IMPROPER LUBRICATION
DESTROYS GUNS
!
Firing a pistol with oil, grease, or any other material
even partially obstructing the bore may result in damage
to the pistol and serious injury to the shooter and those
nearby. Do not spray or apply lubricants directly on
ammunition. If the powder of a cartridge is affected by
the lubricant, it may not be ignited, but the primer
firing may push the bullet into the bore where it may be
lodged. Firing a subsequent bullet into the obstructed
bore may damage the pistol and cause serious injury or
death to the shooter and those nearby. Use lubricants
properly. You are responsible for the proper care and
maintenance of your firearms.
STORAGE
GUNS SHOULD NOT BE STORED LOADED!
Do not keep the pistol stored in a leather holster or case. Leather attracts
moisture, even though the holster or case may appear to be perfectly dry.
PREFERRED METHOD OF SAFE STORAGE –
All RUGER
®
P345
TM
Manual Safety Model Pistols are shipped with a
lock with a 5” shackle. It is very important to use the correct locking
device!
USE THE LOCKING DEVICE SUPPLIED WITH THE PISTOL FOR STORAGE.
(S
EE PAGES 5 & 6)
Sturm, Ruger also offers gun safes for sale as a means to secure more than
one firearm. Please call [phone] for details and ordering information.
ALTERNATIVE METHOD I –
Your RUGER
®
P345
TM
pistol is also equipped with an internal lock. See page 27
for operation instructions.