Manual

CAUTION: A gun containing modified, broken, malfunctioning,

or badly worn parts should not be fired.

ORDERING PARTS

Please contact the New Hampshire Product Service Department for parts avail-

ability and current prices. All parts orders for the RUGER

MINI THIRTY

RIFLE should be sent to: Sturm, Ruger & Co., Inc., Product Service

Department, 411 Sunapee Street, Newport, New Hampshire 03773, 603-865-

2442. We cannot comply with open account or C.O.D. orders. Payment in the

form of a check, money order, Visa or Mastercard must accompany your order.

Credit Card orders must include the account number, expiration date and

whether it is a Visa or Mastercard account. Minimum parts order is $1.00 plus

$3.50 shipping and handling charge. Order parts by Part Name and Part Number

and include the entire serial number of the firearm for which the parts are being

ordered. There is a minimum net labor charge of $20.00 plus $12.00 shipping

and handling charge if the parts are factory fitted. All factory fitted parts are fit

on an exchange basis only. We will not return the replaced parts.

Barrels, and a number of other component parts must be fitted at the factory.

Company policy is to proof-test and/or function fire all barrels after fitting to the

receivers in which they are to be used. This procedure ensures maximum protec-

tion to our customers. The special proof-test ammunition used in this testing is

sold only to bonafide firearms manufacturers and is not available to gun shops,

gunsmiths, or individuals.

Because the receiver of the RUGER

MINI THIRTY RIFLE is a serial

numbered component, it is defined as a “firearm” by Federal law and is not sold

as a separate component.

*Parts designated by an asterisk must be factory fitted. These parts are fitted on

an exchange basis only. We will not return the replaced parts. We will not return

any part that is broken, malfunctioning, badly worn or has been modified. See

“Warning – Parts Purchasers”, above.

WARNING –PARTS PURCHASERS

It is the purchaser’s responsibility to be absolute-

ly certain that any parts ordered from the factory

are correctly fitted and installed. Firearms are

complicated mechanisms and IMPROPER FIT-

TING OF PARTS MAY RESULT IN A DANGER-

OUS MALFUNCTION, DAMAGE TO THE

FIREARM, AND SERIOUS INJURY TO THE

SHOOTER AND OTHER PERSONS. The pur-

chaser and installer of parts must accept full

responsibility for the correct adjustment and

functioning of the rifle after such installation.

PARTS MUST FIT CORRECTLY