Manual

SUGGESTED SIGHT PIC-

TURE

The front sight is aligned in the

center of the rear sight aperture

(“peep”) and the target (bullseye) is

positioned to appear as if it is sit-

ting on top of the front sight.

ELEVATION ADJUSTMENT: To move the bullet impact point up or down, move

the elevation slide (the “peep”) by loosening both its screws (using a small

screwdriver with a blade tip that exactly fits the screw-head) only slightly so the

slide doesn’t move too freely. Move the slide in the direction you want the point

of impact of the bullet to move. When the slide is positioned at the desired

height, carefully retighten both screws.

To Move Impact Up,

Raise Sight

To Move Impact Down

Lower Sight