Manual

17
CORRECT UNLOADING SEQUENCE
1
3a
2
Safety
"ON"
3b
4
2. Remove the magazine. REMEMBER that even though the magazine has been
removed, a cartridge remaining in the chamber can still be fired!
3. Pull the slide handle all the way to the rear, extracting and ejecting the car-
tridge in the chamber. When the bolt is fully retracted, push down on the bolt
lock plunger and then allow the slide to move forward until it comes to rest
against the bolt stop.
4. Always visually double check the chamber to be certain it is empty.
5. The only “safe” rifle is one in which the bolt is open and the chamber and
magazine are empty.