Manual

33
SUGGESTED SIGHT
PICTURE
The front sight is aligned in the
center of the rear sight aperture
(“peep”) and the target (bullseye) is
positioned to appear as if it is
sitting on top of the front sight.
ELEVATION ADJUSTMENT: To move the bullet impact point up or down, move
the elevation slide (the “peep”) by loosening both its screws (using a small
screwdriver with a blade tip that exactly fits the screw-head) only slightly so the
slide doesn’t move too freely. Move the slide in the direction you want the point
of impact of the bullet to move. When the slide is positioned at the desired
height, carefully retighten both screws.
To Move Impact Up
,
Raise Sight
To Move Impact Down
,
Lower Sight