Manual

the chamber to be sure the rifle is completely unloaded! With the muzzle pointed

in a safe direction, pull downward on the rear end of the trigger guard and

remove the trigger housing assembly from the bottom of the rifle.

Store the rifle and the trigger housing assembly in different locations. When

disassembled in this manner, the rifle is inoperable. It is impossible to fire the

rifle until the trigger housing assembly has been correctly replaced.

To reassemble the rifle for firing, reinsert the trigger housing assembly into the

receiver from the bottom. Swing the trigger guard upward and rearward until it

latches securely in place. Check to be sure that the bolt can be operated fully and

freely by operating the slide handle back and forth. The rifle is now reassembled

and can be loaded and fired normally.

While the rifle is less likely to be used by unauthorized persons when

disassembled in the above manner, it is always safest to store a firearm with

the supplied locking device correctly installed, or to store the firearm in a gun

safe or other secure location, away from children and unauthorized adults.

Guns should always be stored securely, unloaded

and separate from their

ammunition.

Never place or store any firearm in

such a manner that it may be

dislodged. Firearms should always be

stored securely and unloaded, away

from children and careless adults. Use

the locking device originally supplied

with this firearm for storage.

The use of a locking device or safety

lock is only one aspect of responsible

firearms storage. For increased safety,

firearms should be stored unloaded

and locked in a location that is both

separate from their ammunition and

inaccessible to children and any other

unauthorized person.

STORE SECURELY & UNLOADED

WARNING –STORAGE