Manual

All work performed is subject to a minimum labor charge and charges for

shipping and handling. Custom gunsmithing service or nonstandard alterations

are NOT AVAILABLE from Ruger Product Service Departments. Please contact

the Product Service Department for pricing information.

ORDERING PARTS

Please contact the New Hampshire Product Service Department for parts

availability and current prices. All parts orders for the

RUGER

LCR

should be sent to: Sturm, Ruger & Co., Inc., Product Service Department, 411

Sunapee Street, Newport, New Hampshire 03773, 603-865-2442. We cannot

comply with open account or C.O.D. orders. Payment in full via credit card (Visa

or MasterCard only), money order or certified bank check (no personal checks,

please) is required before any service will be performed. Please provide your

name as it appears on the credit card along with the expiration date of the card.

All parts orders are subject to a minimum charge and charges for shipping and

handling. Order parts by Part Name and Part Number and include the entire

serial number of the firearm for which the parts are being ordered. There is a

minimum labor charge plus a shipping and handling charge if the parts are

factory fitted. All factory fitted parts are fit on an exchange basis only. We will not

return the replaced parts. Please contact the Product Service Department for

pricing information.

Barrels, cylinders, cylinder/crane assemblies and a number of other component

parts must be fitted at the factory. Company policy is to proof-test and/or

function fire all barrels after fitting to the frames in which they are to be used.

This procedure ensures maximum protection to our customers. The special

proof-test ammunition used in this testing is sold only to bonafide firearms

manufacturers and is not available to gun shops, gunsmiths, or individuals.

WARNING –PARTS PURCHASERS

It is the purchaser’s responsibility to be

absolutely certain that any parts ordered from the

factory are correctly fitted and installed. Firearms

are complicated mechanisms and IMPROPER

FITTING OF PARTS MAY RESULT IN A

DANGEROUS MALFUNCTION, DAMAGE TO

THE FIREARM, AND SERIOUS INJURY TO THE

SHOOTER AND OTHER PERSONS. The

purchaser and installer of parts must accept full

responsibility for the correct adjustment and

functioning of the revolver after such installation.

PARTS MUST FIT CORRECTLY