Manual

The internal parts are installed either through the top or bottom of the grip-

frame; therefore, no side plate is needed. The resulting double solid frame

contributes greatly to the extraordinary strength and reliability of these

revolvers.

The RUGER

GP100

revolver has a transfer bar which is connected directly

to the trigger. The transfer-bar safety system provides that the hammer blow can

be transmitted to the firing pin only when the trigger is pulled all the way to the

rear. This is a positive internal safety feature.

Figure 2.

NOMENCLATURE

Figure 1.

Despite their many highly desirable features, Ruger revolvers–as with all

firearms–must at all times be handled with strict attention to correct safety

practices, and be inspected frequently to assure the gun is working properly.