Manual

It is the purchaser’s responsibility to be
absolutely certain that any parts ordered from
the factory are correctly fitted and installed.
Firearms are complicated mechanisms and
IMPROPER FITTING OF PARTS MAY RESULT
IN A DANGEROUS MALFUNCTION, DAMAGE
TO THE FIREARM, AND SERIOUS INJURY TO
THE SHOOTER AND OTHER PERSONS. The
purchaser and installer of parts must accept full
responsibility for the correct adjustment and
functioning of the revolver after such
installation.
PARTS MUST FIT CORRECTLY
24
!
WARNING –PARTS PURCHASERS
ORDERING PARTS
Please contact the New Hampshire Product Service Department for parts
availability and current prices. All parts orders for the RUGER
®
GP100
®
revolvers should be sent to : Sturm, Ruger & Co., Inc., Product Service
Department, 411 Sunapee Street, Newport, New Hampshire, 03773, 603-865-
2442. We cannot comply with open account or C.O.D. orders. Payment in the
form of a check, money order, Visa or MasterCard must accompany your order.
Credit Card orders must include the account number, expiration date and
whether it is a Visa or MasterCard account. Minimum parts order is $1.00 plus
$3.50 shipping and handling charge. Order parts by Part Name and Part Number
and include the entire serial number of the firearm for which the parts are being
ordered. There is a minimum net labor charge of $20.00 plus $20.00 shipping
and handling charge if the parts are factory fitted. All factory fitted parts are fit
on an exchange basis only. We will not return the replaced parts.
Barrels, cylinders, cylinder/crane assemblies and a number of other component
parts must be fitted at the factory. Company policy is to proof-test and/or
function fire all barrels after fitting to the receivers in which they are to be used.
This procedure ensures maximum protection to our customers. The special
proof-test ammunition used in this testing is sold only to bonafide firearms
manufacturers and is not available to gun shops, gunsmiths, or individuals.
Because it is a serial numbered part, the frame of the RUGER
®
GP100
®
revolver is defined as a ‘firearm’ by Federal Law and is not offered for sale as a
component part.
Parts designated by an asterisk (*) must be factory fitted. These parts are fitted
on an exchange basis only. We will not return the replaced parts. We will not
return any part that is broken, malfunctioning, badly worn or has been modified.
See “Warning – Parts Purchasers” above.
CAUTION: A gun containing modified, broken,
malfunctioning, or badly worn parts should not be fired.
!