Manual

22
SIGHTS
The GP100 revolver is provided with an insert front sight. To change the front
sight, depress the spring-loaded plunger in the front of the barrel rib with a
small punch and lift rear of sight blade. The adjustable rear sight has a white
outline blade. Each click of the rear sight adjustment screws (either windage or
elevation) will move the point of impact of the bullet approximately 3/4” at a
distance of 25 yards. Move the rear sight in the direction you desire the bullet to
move on the target.
RIGHT
LEFT
LEFT
RIGHT
To raise point of impact: turn screw
counterclockwise.
To lower
point of impact: turn screw
clockwise.
To move the point of impact to the right:
turn screw counterclockwise.
To move the point of impact to the left
:
turn screw clockwise.
SUGGESTED SIGHT PICTURE
Top of front sight even with top of rear
sight blade.
Front sight centered in notch of rear
sight blade. Target bullseye centered
on top of front sight.
UP
DOWN
UP DOWN
ELEVATION
WINDAGE