Manual

HANDLING

CARRYING: The GP100 revolver can be carried with all chambers loaded. When

the hammer and trigger are fully forward, the transfer-bar is lowered out of its

firing position and the hammer rests directly on the frame.

WARNING –HANDLING

If the trigger is held to the rear, the gun

can fire if the hammer strikes the

transfer bar. Note that it need not be a

deliberate effort to pull the trigger. Any

situation where the trigger attains its

rearward position and permits the

transfer bar to be interposed between the

hammer and the firing pin can cause the

cartridge under the firing pin to

discharge.

NEVER DROP OR STRIKE THE

REVOLVER – COCKED OR UNCOCKED

CARRY AND HANDLE THE REVOLVER

IN SUCH A MANNER THAT THE

HAMMER AND TRIGGER WILL NOT BE

STRUCK.

NEVER CARRY ANY

REVOLVER WITH THE

HAMMER COCKED OR THE

TRIGGER HELD TO THE REAR

DRY-FIRING

“Dry Firing” is practicing the trigger pull of the empty revolver for practice and

familiarity. The GP100 revolver can be dry-fired without damage to the firing pin

or internal components.

Be sure that the revolver is unloaded before handling. Be sure of your bullet

stop, even when dry-firing for practice. Do not dry-fire the revolver with the

plastic ‘safety disc’ on the cylinder.