Manual

It is the purchaser’s responsibility to be absolutely
certain that any parts ordered from the factory are
correctly fitted and installed. Firearms are
complicated mechanisms and IMPROPER FITTING
OF PARTS MAY RESULT IN A DANGEROUS
MALFUNCTION, DAMAGE TO THE FIREARM, AND
SERIOUS INJURY TO THE SHOOTER AND OTHER
PERSONS. The purchaser and installer of parts must
accept full responsibility for the correct adjustment
and functioning of the revolver after such installation.
PARTS MUST FIT CORRECTLY
ORDERING PARTS
Please contact the New Hampshire Product Service Department for parts
availability and current prices. All parts orders for the RUGER
®
NEW MODEL
SINGLE ACTION revolvers should be sent to : Ruger, Product Service
Department, 411 Sunapee Street, Newport, New Hampshire, 03773, 603-865-2442.
We cannot comply with open account or C.O.D. orders. Payment in full via credit
card (Visa or MasterCard only), money order or certified bank check (no personal
checks, please) is required before any service will be performed. Please provide
your name as it appears on the credit card along with the expiration date of the
card. All parts orders are subject to a minimum charge and charges for shipping
and handling. Order parts by Part Name and Part Number and include the entire
serial number of the firearm for which the parts are being ordered. There is a
minimum labor charge plus a shipping and handling charge if the parts are factory
fitted. All factory fitted parts are fit on an exchange basis only. We will not return
the replaced parts. Please contact the Product Service Department for pricing
information. Barrels, cylinders and a number of other component parts must be
fitted at the factory. Company policy is to proof-test and/or function fire all barrels
after fitting to the receivers in which they are to be used. This procedure ensures
maximum protection to our customers. The special proof-test ammunition used in
this testing is sold only to bonafide firearms manufacturers and is not available to
gun shops, gunsmiths, or individuals.
Because it is a serial numbered part, the cylinder frame of RUGER
®
NEW
MODEL SINGLE ACTION revolvers is defined as a ‘firearm’ by Federal Law
and is not offered for sale as a component part.
Parts designated by an (*) must be factory fitted. These parts are fitted on an
exchange basis only. We will not return the replaced parts. We will not return any
part that is broken, malfunctioning, badly worn or has been modified. See
“Warning – Parts Purchasers” above.
IMPORTANT – REGARDING PARTS ORDERING. Ruger New Model Single
Action revolvers are manufactured in Blued steel and Stainless steel versions.
31