Manual

WARNING –PARTS PURCHASERS

It is the purchaser’s responsibility to be absolutely

certain that any parts ordered from the factory are

correctly fitted and installed. Firearms are

complicated mechanisms and IMPROPER

FITTING OF PARTS MAY RESULT IN A

DANGEROUS MALFUNCTION, DAMAGE TO THE

FIREARM, AND SERIOUS INJURY TO THE

SHOOTER AND OTHER PERSONS. The

purchaser and installer of parts must accept full

responsibility for the correct adjustment and

functioning of the firearm after such installation.

PARTS MUST FIT CORRECTLY

ORDERING PARTS

Please contact the New Hampshire Product Service Department for parts

availability and current prices. All part orders for the RUGER

MODEL

NINETY-SIX should be sent to: Sturm, Ruger & Co., Inc., Product Service

Department, 411 Sunapee Street, Newport, New Hampshire 03773, 603-865-

2442. We cannot comply with open account or C.O.D. orders. Payment in the

form of a check, money order, Visa or Mastercard must accompany your order.

Credit Card orders must include the account number, expiration date and

whether it is a Visa or Mastercard account. Minimum parts order is $1.00 plus

$3.50 shipping and handling charge. Order parts by Part Name and Part Number

and include the entire serial number of the firearm for which the parts are being

ordered. There is a minimum net labor charge of $20.00 plus $12.00 shipping

and handling charge if the parts are factory fitted. All factory fitted parts are fit

on an exchange basis only. We will not return the replaced parts.

*Parts designated by an asterisk must be factory fitted. These parts are fitted on

an exchange basis only. We will not return the replaced parts. We will not return

any part that is broken, malfunctioning, badly worn or has been modified. See

“Warning – Parts Purchasers” above.

CAUTION: A gun containing modified, broken, malfunctioning,

or badly worn parts should not be fired.