Manual

26
SIGHT ADJUSTMENT
The folding leaf rear sight is adjustable for elevation. The slide must be moved
one graduation to change the point of impact by approximately one inch at 25
yards. Use a small screwdriver with a blade tip that exactly fits the screw-head.
Loosen the screws only slightly so the slide doesn’t move too freely. Move the
slide in the direction you want the point of impact of the bullet to move. When
the slide is positioned at the desired height, carefully tighten both screws.
Lateral (windage) adjustment is made by ‘drifting’ the sight base in its slot. Place
a short brass rod against the sight base (and only the base) and tap the sight in
the direction you wish to move the point of bullet impact. Before moving the
sight, pencil mark an index line on the sight base and rib so that sight movement
can be detected.
SUGGESTED SIGHT PICTURE
Top of front sight even with top of
rear sight slide. Front sight
centered in notch of rear sight
slide. Target bulls-eye centered on
top of front sight.