Manual

After cleaning, always check to be certain that rotor movement and tension are
correct, and that no solvent or debris remain. Do not disassemble the magazine.
Improper reassembly or improper tensioning of the rotor spring can cause a
potentially dangerous malfunction. If you experience a problem with the
magazine, don’t use it. Get a new one.
DAMAGED, NON-STANDARD, OR IMPROPERLY
ASSEMBLED MAGAZINES SHOULD NOT BE USED.
THEY CAN CAUSE THE RIFLE TO MALFUNCTION.
Exploded view of the 10/22
magazine components. This
illustration is included to
show the relationship and
names of the magazine
components. As noted in
the text above, the
magazine should not be
disassembled.
CARE AND CLEANING
Make Sure Gun is Unloaded!
Before cleaning, be certain the rifle and its magazine contain no cartridges.
At regular intervals, or whenever the rifle has been exposed to sand, dust,
extreme humidity, condensation, immersion in water, or other adverse
conditions, disassemble, clean and oil it. Proper periodic maintenance is
essential to the reliable functioning of any firearm.
To clean the rifle, proceed as follows:
1. Disassemble (field-strip) the rifle to the extent described on pages 19 & 20.
2. Using a cleaning rod, run a solvent-wetted patch through the bore several
times. Then attach a solvent-wetted bristle brush to the rod and run it back
and forth the full length of the bore as many times as necessary to remove
grease and dirt from the bore and chamber. Clean bore with dry patches and
examine. Bore fouling can contribute to reduced accuracy, and grease
accumulation in the chamber can interfere with proper feeding of cartridges
from the magazine.
3. Using powder solvent on a clean patch or bristle brush, remove powder
residue from all components of the mechanism. After cleaning, run a dry
patch through the bore, then follow with a patch that is very lightly oiled.
Wipe all surfaces clean with cloth, then wipe all surfaces with a patch or cloth
that has been very lightly oiled.
22