Manual

It is the purchaser’s responsibility to be absolute-

ly certain that any parts ordered from the factory

are correctly fitted and installed. Firearms are

complicated mechanisms and IMPROPER FIT-

TING OF PARTS MAY RESULT IN A DANGER-

OUS MALFUNCTION, DAMAGE TO THE

FIREARM, AND SERIOUS INJURY TO THE

SHOOTER AND OTHER PERSONS. The pur-

chaser and installer of parts must accept full

responsibility for the correct adjustment and

functioning of the firearm after such installa-

tion.

PARTS MUST FIT CORRECTLY

WARNING –PARTS PURCHASERS

Work performed will bear a net minimum labor charge of $15.00 plus a $5.00

shipping and handling charge. The charge for rebluing the RUGER

MODEL

10/22

MAGNUM rifle is $35.00 plus a $5.00 shipping and handling charge.

Custom gunsmithing service or nonstandard alterations are NOT AVAILABLE

from Ruger Product Service Departments.

ORDERING PARTS

Please contact the New Hampshire Product Service Department for parts avail-

ability and current prices. All parts ordered for the RUGER

MODEL

10/22

MAGNUM should be sent to: Sturm, Ruger & Co., Inc., Product

Service Department, 411 Sunapee Street, Newport, New Hampshire 03773, 603-

865-2442. We cannot comply with open account or C.O.D. orders. Payment in

the form of a check, money order, Visa or Mastercard must accompany your

order. Credit Card orders must include the account number, expiration date and

whether it is a Visa or Mastercard account. Minimum parts order is $1.00 plus

$3.50 shipping and handling charge. Order parts by Part Name and Part Number

and include the entire serial number of the firearm for which the parts are being

ordered. There is a minimum net labor charge of $15.00 plus $5.00 shipping and

handling charge if the parts are factory fitted. All factory fitted parts are fit on an

exchange basis only. We will not return the replaced parts.

Because the 10/22 Magnum receiver (part number B00111) is a serial numbered

component, it is defined as a “firearm” by Federal law and is not sold as a sepa-

rate component.

*Parts designated by an asterisk must be factory fitted. These parts are fitted on

an exchange basis only. We will not return the replaced parts. We will not return

any part that is broken, malfunctioning, badly worn or has been modified. See

“Warning – Parts Purchasers” above.

CAUTION: A gun containing modified, broken, malfunctioning,

or badly worn parts should not be fired.