User Manual
55
Installation
2.5 Carefully swing the bottom of the heater into the
mounting brackets so that it is resting on the
2.6 Insert the securing screw through the bottom
mounting bracket tab and into the cabinet to keep
the heater from dislodging from the mounting
2.7 Caution: Use fasteners with yield stress greater
than or equal to 58 ksi (400 MPa).
Mounting bracket
Securing screw
Bottom tab detail
Top tab detail
Group B, C, D, Heaters with Defender® Housing
HeaterkW Rating
'A' Dimension
'B' Dimension
'C' Dimension
w/o Extension w/ Extension w/o Extension w/ Extension
in mm in mm in mm in mm in mm
0.75 to 2.69 & 3.6 (T2A) 36.9
938
39.0 991 31.34 796
5.6 142 7.7 195
3.01 to 3.59, 3.6 (T3) & 4.8 55.0
1398
57.1 1451 49.45 1256
4.76, 5.28 to 7.6* 65.1
1653
67.2 1706 59.49 1511
3.13, 3.47, 3.74, 5.0, 6.26,
6.94, 7.47 & 10.0
77.4 1965 79.4 2018 71.78 1823
mostat units require extension
Physical Dimensions