Electric Power Switch - Manual

LiPo (With battery protection turned on)
Please press and hold the more than three seconds. The PWR LED and LIPO LED will turn on. For
switching o please press and hold button until all LEDs turn o. The PWR LED also shows you the
remaining battery capacity when switched on.
SPECIFICATION
WARNING
Always unplug battery after use. This is a electronic switch, which has also
when turned o a minimal current going through the switch. Therefore,
when stored long term (longer then 6h) the battery must be unplugged
as otherwise it will damage your battery.
ELECTRONIC
POWER
SWITCH
(FOR NITRO ENGINES)
RP-0522