Installation Instructions

D
Deutsch
GB
English
F
Français
I
Italiano
NL
Nederlands
E
Español
PL
Polski
GR
Ελληνας
RO
Român
7
REMOVAL
On a front-wheel drive, the orange
hook (4) should be about level with
the axle. It is easier to remove the
chain if you turn the hook-side of
the wheel outwards.
To remove the snow chains, park
your vehicle so that the wheel
comes to a halt with the orange
hook
(4) in the position shown in
the diagram on the right. Then
unhook the two eyelets (9) from
the rubber tensioner (10).
Now release the tensioning chain.
To do this, press the release button
on the ratchet
(6) and pull the chain
back. Repeat this step on the
second ratchet.
On a rear-wheel drive, the orange
hook (4) should be at the top.