User guide

87
Managing the Access Point
Enabling Other Management Access Options
4. Click Update Settings to save your changes. A confirmation message appears at
the top of the page.
You have completed configuring the management access options.
Digest-authentication
Username/Digest-
authentication password
This information is automatically generated by the
AP and used for authentication with FlexMaster.
Change this value only
if you want the AP to
connect to another access control server (ACS).
Contact FlexMaster every Interval at which the device should attempt to
contact FlexMaster
Associated-Clients
Monitoring Mode
When enabled, the AP monitors the association
and disassociation activities of wireless clients and
sends this information to FlexMaster. Available
options include:
• Disable (default): Select to turn off client
association monitoring. When this option is
selected, the AP will not send client association
information to FlexMaster; Flexmaster will
need to retrieve this information from the AP.
• Passive: Select to enable client association
monitoring and send related information to
FlexMaster at the next inform interval.
• Active: Select to enable client association
monitoring and define the monitor interval
(Interval). The AP will check for client
association based on the defined Interval (in
seconds), and then send related information to
FlexMaster as soon as an association event is
detected.
Table 28. TR-069 and SNMP Management Options
Option Description